|
This is a
One-Time Purchase Representing Top Quality - Priceless!
Guaranteed to last the life of your bike.
|
| |
| Question:
Why
do I want to buy Easy Brackets? |
|
Answer:
Everyone will have their
own particular reasons. However some of the most common are:
1. To eliminate damage to the paint on the rear fender with throw over
saddlebags.
2. To be able to remove the bags in seconds when you arrive at you
destination and reinstall them in seconds when you are ready to leave.
3. To return your bike to a clean cruising look.
4. To be able to install your bags to avoid conflicts such as high shot
gun pipes.
|
| |
| Question: How
do Easy Brackets work? |
| Answer: Easy
Brackets are shipped with all the hardware necessary to mount them to
your motorcycle with only basic tools. The kit comes with (4) stainless
steel docking points which are mounted to your motorcycle fender rail.
They will replace the existing fender mounting bolts with longer bolts
and the docking posts. The bracket is then mounted to the back of the
saddlebags with the hardware provided. The bracket then slides onto the
docking posts and locks into place. |
| |
| Question: Are
the Easy Brackets safe and secure? |
| Answer: Yes.
The brackets are fully welded construction of 11 gauge and 12 gauge
steel. The brackets are equipped with a keyed locking mechanism for
security when mounted to the motorcycle. |
| |
| Question: Do
I need stand off guards to keep the saddlebags out of the rear wheel? |
| Answer: No.
Easy Brackets are designed to eliminate the need for stand off guards,
thus providing a very clean appearance when the saddlebags are removed.
|
| |
| Question: Will
Easy Brackets fit my motorcycle? |
| Answer:
Choose your make and model of motorcycle at the bottom of any Easy
Brackets page. For motorcycles not listed the following criteria must
be met. The motorcycle must have two (2) exposed mounting bolts on the
fender rail. The mounting bolts must be aligned with each other when
looking down on the motorcycle and should be relatively on the same
horizontal plane. If you need further clarification, please e-mail us
with the make model and year of your motorcycle and a picture if
possible. |
| |
| Question: What
types of saddlebags will work with Easy Brackets? |
| Answer: Most
hard, flat back saddlebags will work with Easy Brackets. See SADDLEBAGS
this website for more details. |
| |
| Question: Will
my existing saddlebags work with Easy Brackets? |
| Answer: In
most cases. The back of the saddlebags should be flat and relatively
rigid. If the back of the saddlebags are flexible leather, a piece of
rigid material similar to thin aluminum or Plexiglas may be attached to
the inside or outside of the back of the saddlebags to create a rigid
surface to mount the Easy Brackets on. If the saddlebags are the throw
over type, the yoke may be cut off and the exposed edge dyed with black
dye or black shoe polish. |
| |
| Question:
What if I have a detachable backrest? |
| Answer: Easy Brackets are designed specifically for
use with many detachable backrests. See the drop down list at the
products page for your particular motorcycle. |
